01 of 09
Prepare to Carve Your Turkey
This step can feel intimidating, especially during a big meal. No one wants to ruin a beautiful turkey with sloppy carving. Don't worry: If you follow a few simple steps, you'll have a perfectly carved turkey in a few short minutes.Continue to 2 of 9 below.
02 of 09
Let Your Turkey Rest for 30 Minutes
Resting a piece of meat is an important step after roasting. After cooking your turkey, let it rest for at least 30 minutes before carving.
Resting your turkey does two important things: It gives the juices in the meat a chance to settle so they don't go spilling across your cutting board when you start carving. This helps prevent dry meat. It also allows time for the bird to cool so it's easier for you to handle.
When it's time to carve the turkey, we don't recommend doing it at the table. The process involves a certain amount of grappling with the bird that is best confined to the kitchen. Besides, you don't need the added pressure of a captive audience.
If available, use a carving board with a moat around the edge to catch any moisture.Continue to 3 of 9 below.
03 of 09
Use a Sharp Chef's Knife
Some folks suggest using a carving knife, a boning knife, and a chef's knife. Those specialty blades are thinner, longer, and more flexible. But if you've cooked your turkey properly, the joints are going to come apart pretty easily, so your chef's knife should be more than adequate to do the job.
Make sure that whatever knife you use is sharp. When carving a turkey, you want to be able to slice through the skin without shredding it. The goal is to ensure that each slice of meat has its own skin still attached, and this requires a sharp knife.Continue to 4 of 9 below.
04 of 09
Remove the Legs
Grab your knife and pick a leg. Gently slice through the skin between the leg joint and the body while simultaneously pulling the leg away from the carcass. As you pull, you'll see the natural seam between the leg and the body open up. That seam will guide your knife right around the thigh bone until it pops right out. Note that you're not cutting through the joint, you're just popping it out and using your knife to cut through the skin and connective tissue. Repeat with the other leg and set the legs aside.
Note that the breasts are going to take up a lot of space on your platter, so you'll want to platter them first and then arrange the drumsticks and dark meat around them.Continue to 5 of 9 below.
05 of 09
Remove the Wishbone
You can carve the breasts without removing the wishbone, but then you won't be able to make a wish. Some cooks like to remove it before cooking the bird, but for wish-making (as well as food safety) purposes, you want it to be cooked, not raw.
If you'd like to remove the wishbone, turn the bird so the neck is facing you. Cut an upside-down V in the flap of skin covering the neck cavity, then reach in with your fingers and pull out the wishbone. It'll be situated in the same position as your upside-down V.Continue to 6 of 9 below.
06 of 09
Remove and Carve the Breasts
Locate the breastbone running down the middle of the carcass. It's also called a "keel bone" because it's shaped like the keel of a boat. Slice through the skin just to one side of the keel bone and continue slicing downward, cutting close to the breastbone while pulling the entire breast away with your other hand.
The breast is a massive piece of meat that extends all the way down to the wing joint. Keep cutting and pulling away until you've removed the whole breast with the skin still intact.
Turn the breast skin-side up on your cutting board and slice it against the grain, on a bias, about half an inch thick. Shingle the slices on your cutting board in an appealing manner. Repeat with the other breast.
Note: When we refer to the "grain" of a piece of meat or poultry, we're talking about the long strands of muscle fibers that run this way and that throughout the meat. Slicing against (or across) these strands shortens the muscle fibers, making them more tender and easy to chew.Continue to 7 of 9 below.
07 of 09
Separate the Drumsticks From the Thighs
To separate the drumsticks from the thighs, turn the leg pieces over on your cutting board so that the skin side is down and you're looking directly at the meaty part of the joint. Now run your knife along the natural seam that separates the two joints, and they'll come right apart. Transfer the drumstick to your serving platter. Repeat with the other leg.Continue to 8 of 9 below.
08 of 09
Debone and Carve the Thighs
Position the thigh skin-side down on the cutting board. Using the tip of your knife, cut away the meat along one side of the thigh bone, then roll the bone the other way and cut along the other side. You should now be able to remove the thigh bone (set aside for making stock) while leaving the thigh muscle intact and the skin still attached.
Slice the thigh meat, against the grain and on a bias, about half an inch thick. Arrange the slices on your platter and repeat with the other thigh.Continue to 9 of 9 below.
09 of 09
Remove the Wings and Separate Them
The wings are saved for last because they've been helping to stabilize the carcass on the cutting board. You can probably just pull them off, but use your knife to cut around any skin or meat. The wing consists of three sections: the pointy wing tip—the flat or "wingette"—and the "drumette," so called because it looks like a miniature drumstick. You can remove the wing tip (save it for making stock), then separate the drumette from the wingette and arrange them on your platter. Repeat with the other wing.
Congratulations! You've just carved a turkey. On the platter, you have all of your beautiful meat for serving. On your cutting board, you have the carcass, two thigh bones, and two wing tips for making stock or soup. If you don't have time to make stock in the next day or two, place the bones and carcass in a zip-top bag and freeze.